118
...or reset Interface Card ("IFCD RST")
Press the "Enter" key
"PDCD DONE"...
...or...
"IFCD DONE" is displayed
Press the "Esc" key to exit the current
option
Use the "Down" key to select additional
options:
"TAC ON" is displayed
To test the function of the Fronius Pow-
er Relay Card option, press the "Enter"
key
"TAC TEST" is displayed, the AC relay swit-
ches off and the AC connection to the inver-
ter is interrupted (no grid feed).
Press the "Esc" key 2x to exit the
"DATCOM" menu item
Data connection faulty or DATCOM is not installed
If there is a faulty data connection or op-
tions are not installed, "ERROR COM" is
displayed.
Select the respective option using the
"Down" key
7
8
9
10
3
To Next Page
Loading...
