54
The time is shown as
(HH:MM:SS, 24 h display),
the digits for the hour flash.
Use the ‘Up’ and ‘Down’ keys to se-
lect a value for the hour.
Press the "Enter" key.
The digits for the minutes flash.
Repeat steps 5 and 6 for the minutes
and seconds until...
the set time flashes.
Press the ‘Enter’ key
The time is applied, the date is shown
(DD.MM.YYYY), the digits for the day
flash.
Use the ‘Up’ and ‘Down’ keys to se-
lect a value for the day.
Press the ‘Enter’ key
The digits for the month flash.
Repeat steps 9 and 10 for the month
and the last 2 digits of the year until...
5
6
To Next Page
Loading...
