Fronius IG-TL 3.0 - Navigation in the Menu Level; Activating Display Illumination; Automatic Deactivation of Display Illumination; Switching to the NOW Display Mode; Accessing the Menu Level

63
Navigation in the Menu Level
Activating display
illumination
Press any key.
The display illumination is activated.
The Setup menu also offers a choice between a permanently lit or permanently dark
display.
Automatic deacti-
vation of display
illumination /
Switching to the
‘NOW’ display
mode
If no key is pressed for 2 minutes,
- the display illumination turns off automatically and the inverter switches to the ‘NOW’
display mode (if the display illumination is set to automatic).
- The inverter switches to the ‘NOW’ display mode from anywhere within the display
modes or the Setup menu except for the ‘Standby’ menu item.
- the current output power is displayed
Accessing the
menu level
1
Press the ‘Menu’ key.
‘Menu’ appears on the display.
The inverter is now at the menu level.
From the menu level you can
- Set the desired display mode
- Access the Setup menu
1