Fronius IG-TL 3.0 - Setting the Currency and Feed-In Tariff

82
Setting the cur-
rency and feed-in
tariff
The display illumination setting is applied.
The ‘Backlight’ menu item is displayed.
Select the ‘Currency’ menu item.
Press the ‘Enter’ key to apply the lan-
guage.
The currency is displayed, factory setting
= ‘EUR’;
the first of 3 characters flashes.
Use the ‘Up’ and ‘Down’ keys to se-
lect a letter for the first character.
Press the ‘Enter’ key.
The second digit flashes.
Repeat steps 3 and 4 for the second
and third characters until...
the set currency flashes.
Press the ‘Enter’ key.
1
2
3
4
5
6