Fronius IG-TL 3.0 - Page 91

89
The second digit flashes.
Use the ‘Up’ and ‘Down’ keys to se-
lect a value for the second digit.
Press the ‘Enter’ key.
The number of solar modules strings con-
nected to measuring channel 1 flashes.
Press the ‘Enter’ key.
The ‘Config. Channel #1’ parameter is dis-
played.
Use the ‘Down’ key to select the ‘Con-
fig. Channel #2’ parameter.
Press the ‘Enter’ key.
‘Channel #2’ is displayed, the first digit of
the currently set value flashes.
Use the ‘Up’ and ‘Down’ keys to se-
lect a value for the first digit.
Press the ‘Enter’ key.
7
8
9
10
11
12
13