19
EN
Control elements and connections
General Owing to software updates, you may find that your machine has certain functions that are
not described in these Operating Instructions, or vice-versa. Certain illustrations may also
differ slightly from the actual controls on your device, but these controls function in exactly
the same way.
Safety
WARNING!
Danger from incorrect operation.
This can result in severe personal injury and damage to property.
► All the functions described may only be used by trained and qualified personnel.
► Fully read and understand this document.
► Fully read and understand all the Operating Instructions for the system components,
especially the safety rules.
Cold wire feeder
front
Front
(1) Welding torch / (-) current socket
connection
in conjunction with a MagicWave
power source for connecting:
- a TIG welding torch
- the electrode cable for manual
metal arc welding
in conjunction with a TransTig pow-
er source for connecting:
- a TIG welding torch
- the electrode cable or grounding
cable during MMA welding (de-
pending on the type of electrode
used)
(2) Wirefeeding connection
(3) LocalNet connection
standardised connection socket for system extensions (e.g. remote control, Job-
Master welding torch, etc.)
(4) Torch control connection
for connecting the torch control plug
(5) Water flow connection (blue)
(6) Coolant return-flow connection socket (red)
To Next Page
Loading...
