Fronius KD 4000 D-11 - Fitting the Welding Torch; Fit the Welding Torch

24
Fitting the welding torch
Fit the welding
torch
Welding torch and torch control connections
Switch the power source mains switch
to the "Off" position
Connect welding torch control plug to
the LocalNet port (3) or torch control
connection (4) and fasten
If present: connect colour-coded exter-
nal water connections for water flow (5)
and return (6)
Plug welding potential bayonet plug
into current socket (1) and turn to fas-
ten it
Insert the wire feeder, infeed tube first,
into the wirefeeder connection (2)
Tighten the union nut by hand to fix in
place
(4)
(5)(6)(1)
(2)
(3)
1
2
3
4
5
6