17
EN
General
Device concept
Robacta TC 2000 on optional installation stand
The cleaning devices in the Robacta TC
2000 series have been designed to clean a
variety of different welding torch geomet-
ries. The components are contained in a ro-
bust housing. The compact design means it
can be set up in the narrowest of spaces
(e.g., in robot cells). In addition, the clea-
ning devices have been conceived in such
a way that the installation stand and stan-
dard I/O connecting plug (X1) of the Robac-
ta TC 1000 can be used with the cleaning
devices without any modifications.
The cleaning devices are more or less maintenance-free, as there are no mechanically
stressed parts.
Application areas The cleaning device cleans welding torches in automated steel applications. It has been
designed for use in the
- automotive and component supply industry
- equipment construction
- chemical plant construction
- mechanical engineering
- rolling stock construction
- shipyards
Warning notices
on the device
The device is fitted with safety symbols and a rating plate. The safety symbols and rating
plate must not be removed or painted over. The symbols warn against operating the equip-
ment incorrectly, as this may result in serious injury and damage.
To Next Page
Loading...
