Fronius Robacta TC 2000 - Troubleshooting Common Issues

65
EN
Technical data
General
Robacta TC 2000,
Robacta TC 2000
Twin
Robacta TC 2000
US, Robacta TC
2000 Twin US
NOTE! An inadequately dimensioned electrical installation can cause serious
damage. The mains cable and its fuse must be dimensioned to suit the device be-
ing used. The technical data shown on the rating plate applies.
Mains voltage 230 V
Mains voltage tolerance -10% / +10%
Mains frequency 50/60 Hz
Nominal output 180 W
Mains fuse protection (slow-blow) 10 A
Compressed air supply 6 bar
86.99 psi
Minimum cleaning interval from 20 s
Dipping bowl minimum capacity 0.75 l
0.20 gal.
Degree of protection IP 21
Dimensions l/w/h 330 / 250 / 422 mm
12.99 / 9.84 / 16.61 in.
Weight (without "Robacta TC Cool / Robacta TC Cool MD" part-
ing agent)
24.4 kg
53.79 lb.
EMC emission class A
Mark of conformity CE, CSA
Mains voltage 110 V
Mains voltage tolerance -5% / +5%
Mains frequency 50/60 Hz
Nominal output 180 W
Mains fuse protection (slow-blow) 10 A
Compressed air supply 6 bar
86.99 psi
Minimum cleaning interval from 20 s
Dipping bowl minimum capacity 0.75 l
0.20 gal.
Degree of protection IP 21
Dimensions l/w/h 330 / 250 / 422 mm
12.99 / 9.84 / 16.61 in.
Weight (without "Robacta TC Cool / Robacta TC Cool MD" part-
ing agent)
24.4 kg
53.79 lb.
EMC emission class A
Mark of conformity CE, CSA