39
EN
Bolting the cleaning device to the underlying sur-
face (foundation)
Screwing the
cleaning device
and installation
stand to the un-
derlying surface
(foundation)
Place the optional installation stand on a level, firm and vibration-free surface (foun-
dation)
- Position the installation stand in such a way that the distance the robot has to trav-
el to the cleaning device on the installation stand is as short as possible
Screw the installation stand to the underlying surface (foundation) using the appropri-
ate fixings
Position the cleaning device on the in-
stallation stand
Screw the cleaning device to the instal-
lation stand using the four screws sup-
plied with the cleaning device
NOTE! The device should only ever be set up with the designated installation
stand.
NOTE! Different fixings may be required to connect the installation stand to the
underlying surface (foundation) depending on the nature of this surface. The fix-
ings required to connect the installation stand to the underlying surface (founda-
tion) are not included in the scope of supply of the installation stand. The screws
included in the scope of supply of the installation stand are not suitable for fixing
the installation stand to the underlying surface. The installer is responsible for se-
lecting the right type of fixing.
1
2
3
4
To Next Page
Loading...
