Fronius Robacta TC 2000 - Connecting the Cleaning Device to the Robacta Reamer Parting Agent Container

45
EN
Connecting the cleaning device to the "Robacta
Reamer" parting agent container
Connecting the
cleaning device
to the "Robacta
Reamer" parting
agent container
1
NOTE! Only use "Robacta Reamer" parting agent supplied by the manufacturer.
The composition of the manufacturer's parting agent is intended specifically for
the Robacta TC. If other manufacturers' products are used, trouble-free operation
cannot be guaranteed.
NOTE! The parting agent spray time must be set on the robot control. A minimum
spray time of 0.5 seconds can be set.
A spray time of approx. 0.7 seconds is recommended. This may vary depending
on the size of the gas nozzle.
5
2
3
1
4
7
6
1