35 SERIES GAS FRYERS
CHAPTER 1: GENERAL INFORMATION
1-1
1.1 Option Designations
There are many options available for the MJ35 series fryer. When the fryer is equipped with these additional
features, suffixes are added to the model name to identify the options. The position of the identifying letter is
a factor in the option it identifies.
Here’s an example of how a MJ35 fryer’s options are revealed in the model name and a list of option des-
ignators:
Possible filter position designators:
MJ: Master Jet (indicates there is no filter system with fryers)
FM: Filter Magic filter system in separate cabinet banked with fryer
FP: Footprint filtration under the fryer
F: Fryer is configured for attachment to existing filter system
Possible frypot number designators:
1 or no additional number before the series designation: Single frypot
2: Two fryers banked together
3: Three fryers banked together
4: Four fryers banked together
5: Five fryers banked together
6: Six fryers banked together
Possible controller designators:
G: Thermostat control on front panel
V: Thermostat controls located behind cabinet door
Blank, no designator here: Standard control behind front panel
MJ235GBLSC
Indicates presence or
absence of a filter
Indicates number
of frypots in unit.
Series designator
Indicates type,
placement of
controller
Indicates presence
of basket lifts
This position indicates
material used to construct
ypot, cabinet
To Next Page
Loading...
