Frymaster LOV - Page 26

LOV
™
Technical Reference
25
Fryer Setup Mode
Setup mode allows technicians to set the time, date, temperature format, language, fryer type, vat
type and oil system.
1. With the computer displaying
OFF
OFF, press and hold the TEMP and INFO buttons until
LEVEL 1
LEVEL 1 is displayed.
2. Press the TEMP key once to
FRYER SETUP
FRYER SETUP.
3. The computer displays
FRYER SETUP
FRYER SETUP and then changes to
ENTER CODE
ENTER CODE.
4. Enter
1234
1234.
5. Press the 9 (1) button to accept selection.
6. The computer displays
TIME FORMAT
TIME FORMAT on the left and
12 HR
12 HR on the right.
7. Press the button to toggle between
12 HR
12 HR and
24 HR
24 HR time formats.
8. Press the 9 (1) button to accept selection.
9. The computer displays
ENTER TIME
ENTER TIME on the left and
HH:MM
HH:MM on the right.
10. Enter the time in hours and minutes using the 0-9 keys.
11. Press the 9 (1) button to accept selection.
12. The computer displays
ENTER TIME
ENTER TIME on the left and
am
am on the right.
13. Press the button to toggle between
am
am and
PM
PM if
12 HR
12 HR time format was chosen.
14. Press the 9 (1) button to accept selection.
15. The computer displays
DATE FORMAT
DATE FORMAT on the left and
US
US on the right.
7. Press the 9 (1) button to accept the change.
8. The computer displays
CLEAR SIGNATUre
CLEAR SIGNATUre on the left and
COMPLETE
COMPLETE on the right.
This resets the date and time. (NOTE: This will delete any hand-entered menu items.)
9. Press the button to toggle to
FILTER PAD TIME
FILTER PAD TIME on the left and
24
24 on the right. (24 hours
is the default time to change the pad.)
10. Press the 8 (2) button to accept changes and exit.
11. The computer displays
OFF
OFF. Proceed to the next page to enter the setup mode.