LOV
™
Technical Reference
32
Dispose to Waste, Refi ll Pot From Bulk
1. Hold down “fi lter” button until computer beeps twice.
2. Scroll down to “dispose” using “Info” button then press “9” button to select.
3. Select “Yes” by pressing “9” to dispose of oil in pot (this is a timed function).
4. “Vat Empty” is displayed.
5. Select “Yes” (by pressing “9”) if it is empty or “No” (by pressing “8”) if vat still has oil.
6. “Clean Vat Complete” is displayed.
7. Press “9” if vat is clean (oil disposes automatically for 60 seconds, if this is selected) and “8” if it is not
clean and needs to be.
8. “Engage Dispose Switch” is displayed. Change the RTI switch to dispose. If the waste tank is full, the
computer displays “RTI Tank Full.” Call RTI.
9. Press the “9” to start disposal. “Pan to Waste” displayed. The pump will run for 60 seconds.
10. “Pan Empty” is displayed.
11. Press “9” if oil in fi lter pan is empty. Select “8” if pan still has oil in it, and the pump will run for an-
other 60 seconds.
12. “Disengage Dispose Switch” is displayed. Switch off the RTI dispose switch.
13. Press “9” when RTI dispose switch is off.
14. “Fill Pot From Bulk” is displayed.
15. Press and hold “9” if you wish to fi ll pot.
16. Release “9” once pot is at desired level.
17. Press “8” to Exit program.
Dispose to Waste
1. Hold down “fi lter” button until computer beeps twice.
2. Scroll down to “dispose” using “Info” button and press “9” button to select.
3. Select “Yes” by pressing “9” to dispose of oil in pot (this is a timed function).
4. “Vat Empty” is displayed.
5. Select “Yes” (by pressing “9”) if it is empty or “No” (by pressing “8”) if vat still has oil.
6. “Clean Vat” is displayed.
7. Press “9” if vat is clean (oil disposes automatically for 60 seconds, if this is selected) and “8” if it is not
clean and needs to be.
To Next Page
Loading...
