FTS MAXI-COOL - Unit Check; Short Circuit Hose Hook-Up

Installation and Startup
Maxi-Cool
8 Rev 007, 04/12
© SP Scientific 2012
Unit Check
Short Circuit Hose Hook-Up
The input and output connections for the process fluid have 1/2” male pipe 1.
threads on them.
Use a short hose (1/2” ID) to connect the process fluid outlet directly to the 2.
inlet. This will allow the unit’s functionality to be verified before connecting to
your process.
Check that the drain is plugged and the drain valve is closed. 3.