EDC Programmer’s Reference
Rev 007, 04/12 49
© SP Scientific 2012
Group 4: Operational and Miscellaneous Errors
E040 Not Yet Implemented.
Use of a command that is defined to the parser but not presently implemented
by SP Scientific.
E041 Stop Error.
System already stopped has received a "STOP" command.
E042 Start Error.
System already started has received a "START" command.
E043 Not a User Function.
Certain operational commands are defined to the system and reserved for
factory use. Error 43 reports use of such a command without proper security
access.
E044 Local Lockout.
Unit is locked in local. Removal of this lock may only be accomplished from
the system control panel before changes to system state may be made from
the RS-232.
To Next Page
Loading...
