SeaSTAR 3610 USER MANUAL
Set GPS L1 sites menu
From this menu the GPS L1 reference stations which
shall be output, are set. These settings are only in use
when a GPS L1 subscription is enabled.
The following options may be selected:
On/off/nearest
It is possible to set all GPS L1 sites on or off, to use the
nearest stations or manually setting individual sites on or
off. How many of the nearest stations to use, is
configurable. Factory default value is 32. When using
the nearest sites option, it is important to insert the
position into the receiver. The position is set in the
Set pos/ch menu.
When setting all GPS L1 sites on or off, it is possible to
manually set which sites to use or not use. The
reference station sites are all received on the air and
stored in the receiver.
Use the and buttons to view the available reference
stations. Press the button to be able to change the
setting. Use the and buttons to select the setting and
press to save the setting.
Set GLO L1 sites menu
From this menu the GLO L1 reference stations which
shall be output, are set. These settings are only in use
when a GPS L1 and GLO L1 subscription is enabled.
The following options may be selected:
On/off/nearest
It is possible to set all GLO L1 sites on or off, or only to
use the nearest stations. How many of the nearest
stations to use, is configurable. Factory default value is
32. When using the nearest sites option, it is important
to insert the position into the receiver. The position is set
in the Set pos/Ch menu.
When setting all GLO L1 sites on or off, it is possible to
manually set which sites to use or not use. The
reference station sites are all received on the air and
stored in the receiver.
Issue 2.0 02/10
17
To Next Page
Loading...
