Fuji Electric FRENIC-Lift LM2C Series - Page 13

xi
Conformity with Canadian standards and U.S. standards (Continued)
5. Install CSA or UL certified fuses or Circuit breaker between the power supply and the inverter, referring to
the table below.
Power
supply
voltage
Nominal
applied
motor (kW)
Inverter type
Fuse rating [A]
(Class)
Circuit breaker (MCCB)
or
RCD/ELCB etc [A]
With
DCR
Without
DCR
With
DCR
Without
DCR
Three
-
phase 400 V
4.0 FRN0010LM2C-4
-
10
-
5.5 FRN0015LM2C-4 15
7.5 FRN0019LM2C-4 20
11 FRN0025LM2C-4 30
15 FRN0032LM2C-4 40
L1/R
L2/S
L3/T
24V+
24V-
Fuses
Three-
Phase
400V
MC
Disconnect
MCCB
or
RCD/ELCB, etc.
( )
Power
supply
24VDC
(*1)
R0
T0
(*1)
Note: A box () replaces an alphabetic letter depending on the shipping destination.
Shipping destination: E (Europe)
*1) Not more than 6A (RMS) fuses or not more than 5A (RMS) breakers for 24V power supply and control power supply (R0 and
T0).