C
Cindy MontgomerySep 5, 2025
What does braking transistor broken mean on Fuji Electric Inverter?
- CcastrodillonSep 5, 2025
Detection of an abnormality in the brake transistor of Fuji Electric Inverter.
To Next PageTo Next PageWhat does braking transistor broken mean on Fuji Electric Inverter?
Detection of an abnormality in the brake transistor of Fuji Electric Inverter.
What does external alarm mean on Fuji Electric Inverter?
The external alarm THR was entered in Fuji Electric Inverter.
What does option error mean on Fuji Electric Inverter?
An error was detected by the connected option card (not by the Fuji Electric Inverter).
What is operation protection on Fuji Electric Inverter?
An incorrect operation was attempted on Fuji Electric Inverter.
What does brake confirmation mean on Fuji Electric Inverter?
The Fuji Electric Inverter detects mismatch between the brake control signal and brake detection (feedback) signal.
What does data saving error during undervoltage mean on Fuji Electric Inverter?
When the undervoltage protection was activated, the Fuji Electric Inverter failed to save data, showing this error.
General| Brand | Fuji Electric |
|---|---|
| Model | FRENIC-Lift LM2C Series |
| Category | Inverter |
| Language | English |
Lists related manuals for detailed information.
General safety advice and warnings for proper use.
Guidelines for inverter mounting, clearances, and ventilation.
Instructions for safe and correct electrical connections.
Safety procedures before operating the inverter.
Essential safety steps for maintenance and guidelines for disposal.
Lists European standards the product complies with.
Safety requirements for grounding and fuse installation.
Specifies short circuit protection and environmental conditions.
Details on warranty duration, coverage, and trouble diagnosis.
Procedures for unpacking, inspecting, and verifying the inverter.
Guidelines for safe and effective inverter-to-motor wiring.
Specifies environmental conditions for installation, operation, and storage.
Guidelines for mounting, clearances, and ventilation.
Information on wire sizes, terminal arrangements, and screw specifications.
Illustrates various wiring and connection diagrams for the inverter.
Details on slide switches and keypad mounting.
Introduction to the optional keypad and compatible versions.
Essential checks before powering on and initial verification steps.
Procedures for motor test runs, function codes, and practical operation prep.
A quick list of alarm codes and their descriptions.
Procedures for routine checks to ensure reliable operation.
Lists parts for replacement and how to make inquiries.
Detailed technical specifications for the 400V series.
Diagrams and measurements of the inverter's physical size.
Compliance with EU directives and relevant European standards.
Guidelines for EMC compliance and harmonic component regulations.
Details on the functional safety standard and performance.
Information regarding CSA certification and U.S. standards.
