Fuji Electric Monitouch V9 Series - Page 116

2
2. Local Mode Screen 2-75
Local Mode Screen
Administrator Authentication
Authentication of administrator privileges is required before adding a new user account or
deleting/editing a registered user account, if any.
1. Press [User Settings] in the menu icons and press the [Administrator Authentication] switch.
2. The screen for administrator authentication is displayed. Enter an administrator name and
password, and press the [OK] switch. “Administrator Mode” is displayed on the screen.
* If the User Settings screen is switched to other screens after authentication, administrator
authentication is automatically cancelled.
Without administrator privileges, no account can be added, deleted, nor edited.
Addition, deletion and editing
of a user account possible
Addition, deletion and editing
of a user account impossible