Output Format
113
Copy
3
[Booklet Creation - Binding Shift] Screen
This screen allows you to specify the binding shift value in the range from 0 to 50 mm
in 1 mm increments.
1 Use [+] and [-] or the numeric keypad to
specify a binding shift value.
[Booklet Creation - Divide Output] Screen
When you have a large number of originals, the originals are divided to create subsets
to reduce the thickness of each booklet. The machine folds copies in half, and piles
them up to form a booklet.
You can specify the number of sheets in the range from 1 to 50 in 1 sheet increments.
Note • When you specify the folding feature, specify the dividing number of sheets in the range
from 1 to 15.
1 Select [On].
2 Specify the number of sheets using [+] and [-] or the numeric keypad.
[Booklet Creation - Fold & Staple] Screen
When the Booklet Maker Unit for Finisher-B1 (optional) or the Finisher-C1 with Booklet
Maker (optional) is installed, [Fold Only] and [Fold & Staple] become available.
1 Select any option.
îš„Off
No finishing is carried out.
îš„Fold Only
z
When the Booklet Maker Unit for Finisher-B1 (optional) is installed:
The copies are creased in half. The number of copies that can be creased is up to 5.
When the number is more than 5, the document is divided by every 5 sheets.
z
When the Finisher-C1 with Booklet Maker (optional) is installed:
The copies are folded in half. The number of copies that can be folded is up to 5.
When the number is more than 5, the document is divided by every 5 sheets.
To Next Page
Loading...
Need help?
General
