3 Copy
124
Copy
3
îš„Include Covers/Separators
This option is available when you select [All Pages]. Select this check box to include
covers and separators.
îš„Starting Number
Allows you to specify a starting page number to add page numbers, in the range from
1 to 999.
Note • Use [+] and [-], or the numeric keypad to enter a starting page number.
[Bates Stamp] Screen
This screen allows you to add prefix text and page numbers onto copies.
1 Select any option.
îš„Off
Does not add prefix text or page numbers onto copies.
îš„On
Adds prefix text and page numbers onto copies.
îš„Prefix
Allows you to enter prefix text with up to 16 characters, using the displayed keyboard.
îš„Number of Digits
Displays the [Bates Stamp - Number of Digits] screen.
You can select [Auto Assign] or [Manual Assign]. When you select [Manual Assign],
you can specify the number of digits to be used for page numbers in the range from 1
to 9 in 1 digit increments.
îš„Apply To
Displays the [Apply Bates Stamp To] screen.
Refer to "[Apply Bates Stamp To] Screen" (P.125).
îš„Position
Displays the [Bates Stamp - Position] screen.
You can select a prefix and page-number position from six options.
For side 2 of copy sheets, you can select [Same as Side 1] or [Mirror Side 1].
îš„Font Size
Displays the [Bates Stamp - Font Size] screen.
You can select a prefix and page-number size from three options, or can directly
specify a size in the range from 6 to 24 points in 1 point increments.
To Next Page
Loading...
Need help?
General
