Output Format
127
Copy
3
îš„Serial Number
Allows you to select whether to print the serial number of the machine.
îš„User Account Number
Allows you to select whether to print a user account number when the Authentication
or Accounting feature is enabled. However, if a user is not authenticated, the account
number will not be printed.
Note • [User Account Number] is the No. (User Administration Number) registered by users with the
Authentication and Accounting feature.
• You can see if a user is authenticated by checking whether the <Log In/Out> button is lit.
îš„Original Orientation
Allows you to specify the orientation of the document so that the machine can identify
the top of the document.
Note • If the [Original Orientation] setting differs from the actual document orientation, the machine
may not detect the top of the document correctly.
z
Upright Images
Select this option when placing the top edge of the document against the top side of
the document glass or document feeder.
z
Sideways Images
Select this option when placing the top edge of the document against the left side of
the document glass or document feeder.
îš„Watermark Effect
Displays the [Watermark Effect] screen.
Refer to "[Watermark Effect] Screen" (P.128).
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
[Stored Watermarks] Screen
This screen allows you to select text to print on copies.
1 Select [On].
2 Select any text.
îš„Off
No text is printed.
îš„On
Text is printed. Select the text to be used as the watermark. You can specify text from
three preset options, or text registered in System Administration mode.
For information on how to register text, refer to "5 Tools" > "Common Service Settings" > "Watermark"
> "Custom Watermark 1 to 3" in the Administrator Guide.
To Next Page
Loading...
Need help?
General
