Fax
4
4 Fax
174
The IP Fax (SIP) feature can be used in the following four connection configurations:
Note • Method to input IP Fax destination differs depending on the connection configuration.
îš„IP Fax (SIP) Device Only
IP Fax (SIP) devices communicate with each other directly, using an IP network (Intranet).
SIP device address of the communication target shall be designated as an IP Fax (SIP)
between IP Fax (SIP) devices. For example, 1111@192.168.1.1 (address of SIP
device).
îš„SIP Server Installed
IP Fax (SIP) devices communicate via a SIP server, using an IP network (Intranet).
Since a SIP server utilizes address translation, an IP fax (SIP) can be sent to IP Fax
(SIP) devices by a designated SIP user name or telephone number. For example, 1111
(SIP user name) or 0312345678 (telephone number).
îš„ VoIP Gateway Installed
In addition to direct communication between IP Fax (SIP) devices in an IP network
(Intranet), communication with a G3 Fax device, which does not have an IP Fax (SIP)
feature, is possible using a VoIP gateway.
An IP fax (SIP) can be sent in the following two methods:
z
For an IP Fax (SIP) device, designate the SIP device address of the communication
target. For example, 1111@192.168.1.1 (SIP device address).
z
For a G3 Fax device, designate the telephone number. For example, 0312345678
(telephone number).
îš„SIP Server and VoIP Gateway Installed
In addition to the communication between an IP Fax (SIP) device using a SIP server in
an IP network (Intranet), communication with a G3 Fax device, which does not have a
IP Fax (SIP) feature, is possible using a VoIP gateway.
Since a SIP server utilizes address translation, an IP Fax (SIP) can be sent to an IP
Fax (SIP) device by designating the SIP user name or telephone number.
For a G3 Fax device, an IP fax can be sent by designating a telephone number.
For example, 1111 (SIP user name) or 0312345678 (telephone number).
To Next Page
Loading...
Need help?
General
