Fuji Xerox ApeosPort-IV 3070 User Manual

Safety Notes
23
Before Using the Machine
1
With Finisher-C1 with Booklet Unit (optional), Side Tray (optional),
and HCF Kit (optional)
(Unit: mm)
Do not incline the product at more than 10 degree angle. Otherwise, it may fall
over and cause injuries.
Always lock the wheels of this product and turn down the adjustable foot to the
floor after installation. Otherwise, it may fall over or slide and cause injuries.
To keep this product in a good performance and condition, always use it in the
following environment:
z
Temperature: 10 - 32°C (28°C or less at the humidity of 85%)
z
Humidity: 15 - 85% (62.5% or less at the temperature of 32°C)
When the product is left in a chilly room and the room is rapidly warmed up by
heater, dew condensation may form inside the product and cause a partial
deletion on printing.
400
411
693
100
25
100
2138
1604
2013
10
10
10
10
°
°
°
°
Front
Back
Front
Back
Left
Right
Left
Right

Fuji Xerox ApeosPort-IV 3070 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-IV 3070
Category	Copier
Language	English