5 Scan
252
Scan
5
2 While documents are being scanned, select
[Next Original].
Note • When using the document feeder, load
the next document after the machine has
finished scanning the first document.
•
When [Next Original] is displayed on the
screen shown on the right and no operation
is performed for a certain period of time,
the machine automatically assumes that
there are no more documents.
• You can change the scan settings of the
next document by selecting [Change
Settings] that is displayed after selecting
[Next Original].
3 Load the next document.
4 Press the <Start> button.
If you have more documents, repeat steps 3
and 4.
5 When all documents have been scanned,
select [Last Original].
123
4
56
789
0#
C
<Start> button
To Next Page
Loading...
