6 Send from Folder
332
Send from Folder
6
îš„Print
Files in a folder can be printed.
1 Select files on the [File List] screen.
2 Select [Job Flow Settings].
3 Select any option.
îš„Auto Start
Enables automatically starting the job flow for files stored in the folder. The job flow
automatically starts when a file is stored.
îš„Start Current Job Flow
Select files in the folder, and then select this button to start the job flow linked to this
folder.
Important • After executing the job flow, confirm the [Job Status] screen or print the Job History Report
to check the results. For information on the Job History Report, refer to "5 Tools" >
"Common Service Settings" > "Reports" > "Job History Report" in the Administrator Guide.
îš„Cut Link
Cancels the link between a folder and the linked job flow sheet.
îš„Create/Change Link
Displays the [Link Job Flow Sheet to Folder] screen.
Refer to "[Link Job Flow Sheet to Folder] Screen" (P.333).
îš„Select Job Flow Sheet
Select this button while files are selected to display the [Select Job Flow Sheet] screen.
Refer to "[Select Job Flow Sheet] Screen" (P.335).
To Next Page
Loading...
Need help?
General
