Control Panel
61
Product Overview
2
19 <(Not In Use)> button Press this button to call its associated service.
To the button, you can assign [Language] or any service displayed on
the [Services Home] screen.
For information on how to assign a service to the button, refer to "1 Before
Using the Machine" > "Customizing the Control Panel" > "Assigning Services
to the Custom Buttons" in the Administrator Guide.
20 <Review> button [Review] is assigned to this button by default.
On the [Review] screen, you can check a list of the status of Copy, Fax,
and Scan services whose settings have been changed from the
defaults. You can also check the details of fax and e-mail recipients.
For information on how to assign a service to the button, refer to "1 Before
Using the Machine" > "Customizing the Control Panel" > "Assigning Services
to the Custom Buttons" in the Administrator Guide.
21 USB memory slot Slot to insert a USB 2.0 memory device.
Note • This feature is not available for some models. An optional
component is required. For more information, contact our
Customer Support Center.
22 One touch panels
(Only available for
machines with the Fax
service)
Contains one touch buttons.
Turn over the panels to display buttons 1 - 70, M01, and M02.
There are two ways in which address numbers and stored programs are
assigned to the one touch buttons. Select either of the following:
z
[Type 1]
Buttons 1 to 70 are used for address numbers and they correspond to
the registered address numbers 0001 to 0070, while buttons M01 and
M02 are used for stored programs and they correspond to the
registered stored programs 1 and 2.
z
[Type 2]
Buttons 1 to 60 are used for address numbers and they correspond to
the registered address numbers 0001 to 0060, while buttons 61 to 70,
M01, and M02 are used for stored programs and they correspond to
the registered stored programs 1 to 12.
Note • By default, [Type 1] is selected.
• This feature is not available for some models. An optional
component is required. For more information, contact our
Customer Support Center.
For information on how to change the settings registered to the one touch
buttons, refer to "5 Tools" > "Common Service Settings" > "Screen/Button
Settings" in the Administrator Guide.
No. Component Function
To Next Page
Loading...
Need help?
General
