Fuji Xerox ApeosPort-IV C3375 User Manual

Printing and Deleting Stored Jobs
413
Job Status
11
6 Select the job to be printed or deleted.
7 Select any option.
8 When printing, specify the number of print sets using the numeric keypad.
 Delete
Deletes the Charge Print job.
Refer to "When [Delete] is Selected" (P.413).
 Print Quantity
Specify the number of print sets using the numeric keypad.
 Print
Prints the Charge Print job. After printing, the job is deleted.
Refer to "When [Print] is Selected" (P.413).
When [Delete] is Selected
1 Select [Delete].
 Delete
Deletes the job.
Important •Once the job is deleted, it cannot be restored.
 Cancel
Cancels deleting the job.
When [Print] is Selected
1 Specify how to process the job after printing.
Note • The screen as shown on the right does not
appear if [Print Job Confirmation Screen] is
set to [Disabled] in the System
Administration mode. If [Disabled] is
selected, the machine automatically deletes
the job after printing without displaying the

Fuji Xerox ApeosPort-IV C3375 Specifications

General

Print Resolution	1200 x 2400 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Memory (Standard)	2 GB
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	35 ppm
Connectivity	Ethernet, USB
Paper Size	A3, A4, A5, B4, B5
Hard Drive	160 GB
Network Connectivity	Ethernet
Copy Speed (Color)	35 cpm
Copy Speed (Mono)	35 cpm