Layout Adjustment
115
Copy
3
1 Select [Image Shift].
2 Select any option.
îš„Off
Does not shift the position of document images.
îš„Auto Center
Shifts document images so that they are placed in the center of paper.
îš„Margin Shift
Allows you to specify the amounts of the top and bottom, and left and right margins in
the range from 0 to 50 mm in 1 mm increments.
z
Side 1
Displays the [Image Shift - Side 1] screen.
Refer to "[Image Shift - Side 1] Screen" (P.116).
z
Side 2
Displays the [Image Shift - Side 2] screen.
Refer to "[Image Shift - Side 2] Screen" (P.116).
z
Mirror Side 1
Select this check box when you want the positioning of Side 2 to match the
positioning of Side 1.
îš„Original Orientation
Allows you to specify the orientation of the document so that the machine can identify
the top of the document.
Note • If the [Original Orientation] setting differs from the actual document orientation, the machine
may not detect the top of the document correctly.
z
Upright Images
Select this option when placing the top edge of the document against the top side of
the document glass or document feeder.
z
Sideways Images
Select this option when placing the top edge of the document against the left side of
the document glass or document feeder. Always select [Sideways Images] when the
top of the document is placed facing the left side (horizontal text).
To Next Page
Loading...
Need help?
General
