Fuji Xerox ApeosPort-IV C5570 User Manual

8 Stored Programming
348
Stored Programming
8
Stored Programming Overview
The Stored Programming service allows you to store settings that you expect to use
frequently and call them with a single button operation. You can also assign a screen
to a stored program button, to use the button as a short-cut to the screen.
A stored program can store not only settings of a feature, but a flow of settings
configured on multiple screens.
For example, this service is available when you want to record a procedure starting
from pressing the <Machine Status> button, to displaying the screen under [Print
Reports] to print a Job History Report.
In addition, while Build Job is running, this service can be used for the remaining
document stacks.
For information on Build Job, refer to "Build Job (Processing Documents Scanned with Different
Settings as One Job)" (P.155).
The following shows the reference section for each feature.
Registering/Deleting/Renaming Stored Programs....................................................................349
Calling a Stored Program..........................................................................................................355

Fuji Xerox ApeosPort-IV C5570 Specifications

General

Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	55 ppm (color and monochrome)
Monthly Duty Cycle	300, 000 pages
Connectivity	Ethernet, USB
Paper Size	A3, A4, A5, B4, B5
Memory	2 GB
Hard Disk Drive	160 GB
Copy Speed	55 cpm (black/white and color)