Fuji Xerox ApeosPort-IV C5570 User Manual

Job Assembly
155
Copy
3
Job Assembly
This section describes the features you can select on the [Job Assembly] screen. The
following shows the reference section for each feature.
Build Job (Processing Documents Scanned with Different Settings as One Job) ................... 155
Sample Job (Checking the Finished Output of the Copy)........................................................ 160
Combine Original Sets (Adding Originals).............................................................................. 161
Delete Outside/Delete Inside (Deleting Outside or Inside of the Selected Area) .................... 162
Stored Programming (Calling a Stored Program for Build Job).............................................. 164
1 Select [Copy] on the [Services Home]
screen.
2 Select a feature on the [Job Assembly]
screen.
Build Job (Processing Documents Scanned with Different Settings as One Job)
This feature allows you to apply different copy settings to each document page or each
document stack, and then output the copies as one job.
1 Select [Build Job].
2 Select [On].
3 Select any option.
Note • Select [ ] to return to the previous screen or [ ] to move to the next screen.

Fuji Xerox ApeosPort-IV C5570 Specifications

General

Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	55 ppm (color and monochrome)
Monthly Duty Cycle	300, 000 pages
Connectivity	Ethernet, USB
Paper Size	A3, A4, A5, B4, B5
Memory	2 GB
Hard Disk Drive	160 GB
Copy Speed	55 cpm (black/white and color)