Fuji Xerox ApeosPort-IV C5570 User Manual

Layout Adjustment
117
Copy
3
Corner Shift
Shifts document images so that they are placed at an edge or corner of paper. You can
select from 8 shift directions.
Specify the amounts of the top and bottom, and left and right margins in the range from
0 to 50 mm in 1 mm increments.
Margin Shift
Allows you to specify the amounts of the top and bottom, and left and right margins in
the range from 0 to 50 mm in 1 mm increments.
Invert Image (Making Reversed Copies of Images)
This feature allows you to reverse the left and right sides of the document image or to
create a negative image of the document when making copies.
Note • When [Output Color] is set to [Black & White] or [Single Color], the black color on the
document is inverted to white, and the white color to black.
• When [Output Color] is set to [Color], the colors are inverted to their complementary colors.
• When [Negative Image] and [Edge Erase] are set simultaneously, the edge erase area turns
to white.
1 Select [Invert Image].
2 Select any option.
Mirror Image
Reverses the left and right sides of the document image.
Negative Image
Creates a negative image of the document.

Fuji Xerox ApeosPort-IV C5570 Specifications

General

Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Fax Transmission Speed	33.6 kbps
Operating System Compatibility	Windows, Mac OS, Linux
Print Speed	55 ppm (color and monochrome)
Monthly Duty Cycle	300, 000 pages
Connectivity	Ethernet, USB
Paper Size	A3, A4, A5, B4, B5
Memory	2 GB
Hard Disk Drive	160 GB
Copy Speed	55 cpm (black/white and color)