Fax
4
4 Fax
204
2 Select [Shift], and enter in the following
format: "<", "port number", ">", "recipient’s
telephone number"
The following shows the corresponding lines
to each port:
<1>: Line 1
<2>: Line 2
<3>: Line 3
Example when using Line 1:
<1>XXXXXXXXXX
Entering Specific Symbols
When specifying a recipient, you can use the following features to enter specific
symbols on the touch screen.
When using the DTMF method, use specific symbols. For information on the DTMF method, refer to
"Remote Folder (Using Remote Folder)" (P.225) and "Broadcast" (P.241).
Feature Button Function Input method
Enter pause - or
<Pause> (-)
Used to enter a pause.
One pause is 3 seconds.
You can enter pauses of
6 seconds, 9 seconds,
etc. with additional
button presses.
Press the <Pause>
button.
(Example)
0-123 ...
0--123 ...
Transmit using a
password
S When a password has
been set, transmission
will start only if the
password matches the
ID number on the remote
terminal.
1. Select [New
Recipients] on the
[Fax/Internet Fax]
screen to display the
keyboard.
2. Select [S].
(Example)
0312345678S12345678
Transmit DTMF
signal
! Used to transmit the
DTMF signal.
1. Select [New
Recipients] on the
[Fax/Internet Fax]
screen to display the
keyboard.
2. Select [More
Characters].
3. Select [!].
(Example)
0311123456!123#
To Next Page
Loading...
Need help?
General
