Output Format
121
Copy
3
Booklet Creation (Creating a Booklet)
This feature lays out pages so that booklets are formed when the output sheets are
folded in half. You can also set the binding shift and attach a cover when making
booklets.
When the Finisher C2 with Booklet Maker (optional) or the Finisher D2-P with Booklet
Maker (optional) is installed, you can also fold the output sheets in half, or staple the
folded output sheets.
Important • Ensure that the actual orientation of the original document matches the [Original Orientation]
setting on the [Layout Adjustment] screen.
Note • The machine copies four pages of the document onto one sheet of paper. If the number of
pages in the booklet is not a multiple of four, the remaining pages will be output as blank
pages.
• If [Auto Select] is selected in [Paper Supply], a tray specified in [Auto Paper Off] is
automatically selected. Change the setting if necessary. For information on [Auto Paper Off],
refer to "5 Tools" > "Copy Service Settings" > "Copy Control" in the Administrator Guide.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
1 Specify the orientation of the document in
[Original Orientation] on the [Layout
Adjustment] screen.
2 Select [Booklet Creation] on the [Output
Format] screen.
3 Select any option.
îš„Off
Disables this feature.
îš„Create Left/Top Bound Booklet
Copies are made to enable left binding or top binding.
îš„Create Right Bound Booklet
Copies are made to enable right binding.
To Next Page
Loading...
Need help?
General
