About the [Services Home] Screen
67
Product Overview
2
îš„Screen Brightness
You can adjust the screen brightness of the touch screen.
îš„Lock Out Printer/Release Printer
You can set the machine to temporarily enable printing during the printer lockout period
or to temporarily disable printing while [Release Printer] is displayed.
Note • You can assign this button when [Printer Lockout] is set to [On] under [Tools] > [Common
Service Settings] > [Machine Clock/Timers] and the [Allow User to Lock Out] check box is
selected. For information on how to assign the feature to the button, refer to "5 Tools" >
"Common Service Settings" > "Screen/Button Settings" in the Administrator Guide.
îš„Setup
You can create or update folders, job flows, and the Address Book.
For more information, refer to "5 Tools" > "Setup" in the Administrator Guide.
îš„Calibration
The machine can automatically calibrate colors when the reproducibility of density or
color in copies and prints deteriorates.
For more information, refer to "3 Maintenance" > "Executing Calibration" in the Administrator Guide.
îš„Activity Report
You can print an Activity Report to check if a transmission is successfully completed.
For information on the contents listed in the Activity Report, refer to "16 Appendix" > "Activity Report"
in the Administrator Guide.
îš„Fax Receiving Mode
You can specify a mode for receiving faxes.
For more information, refer to "4 Machine Status" > "Machine Information" > "Fax Receiving Mode" in
the Administrator Guide.
îš„Print Mode
You can register a print mode and change its settings.
For more information, refer to "4 Machine Status" > "Machine Information" > "Print Mode" in the
Administrator Guide.
To Next Page
Loading...
Need help?
General
