Fuji Xerox ApeosPort-IV C7780

3 Copy
148
Copy
3
z
Finisher D2-P with Booklet Maker
The Finisher D2-P with Booklet Maker cuts the staple nails depending on the number
of sheets. The stapled nails may be bent depending on the type of paper used.
Important • Ensure that the actual orientation of the original document matches the [Original Orientation]
setting on the [Layout Adjustment] screen.
• In the following cases, the actual stapling position differs from the stapling position displayed
on the screen:
• When [Original Orientation] is set to [Upright Images], and [Staple] is set to one position
at the right side.
• When [Original Orientation] is set to [Sideways Images], and [Staple] is set to one
position at the left side.
Hole Punch
Sets the position for punching.
The positions for punching vary depending on a finisher installed.
Important • Ensure that the actual orientation of the original document matches the [Original Orientation]
setting on the [Layout Adjustment] screen.
Original Orientation
Allows you to specify the orientation of the document so that the machine can identify
the top of the document.
Note • If the [Original Orientation] setting differs from the actual document orientation, the machine
may not detect the top of the document correctly.
z
Upright Images
Select this option when placing the top edge of the document against the top side of
the document glass or document feeder.
z
Sideways Images
Select this option when placing the top edge of the document against the left side of
the document glass or document feeder. Always select [Sideways Images] when the
top of the document is placed facing the left side (horizontal text).
- Plain (64 - 79 gsm) - Plain (80 - 90 gsm)
- Plain (91 - 105 gsm) - Heavyweight (106 - 128 gsm)
- Heavyweight (129 - 150 gsm) - Heavyweight (151 - 176 gsm)
- Extra-HW (177 - 220 gsm) - Extra-HW Plus (221 - 256 gsm)
- X-HW Plus 2 (257 - 300 gsm) - Plain Reload (64 - 79 gsm)
- Plain Reload (80 - 90 gsm) - Plain Reload (91 - 105 gsm)
- HW Reload (106 - 128 gsm) - HW Reload (129 - 150 gsm)
- HW Reload (151 - 176 gsm) - Recycled (64 - 79 gsm)
- Recycled (80 - 90 gsm) - Recycled (91 - 105 gsm)
- Gloss (106 - 128 gsm) - Gloss (129 - 150gsm)
- Gloss (151 - 176 gsm) - HW Gloss (177 - 220 gsm)
- X-HW Gloss (221 - 256 gsm) - Gloss Reload (106 - 128 gsm)
- Gloss Reload (129 - 150 gsm) - HW Gloss Reload (151 - 176 gsm)
- HW Gloss Reload (177 - 220 gsm) - X-HW Gloss Reload (221 - 256 gsm)
- Tab Stock (106 - 128 gsm) - Tab Stock (129 - 150 gsm)
- Tab Stock (151 - 176 gsm) - HW Tab Stock (177 - 220 gsm)
- X-HW Tab Stock (221 - 256 gsm) - X-HW Tab Stock (257 - 300 gsm)