Layout Adjustment
213
Fax
4
Reduce/Enlarge (Specifying a Scan Ratio)
This feature enlarges or reduces scanned images with a specified ratio.
Important • Some destination machines may not be able to receive faxes at the specified ratio.
1 Select [Reduce/Enlarge].
2 Select a preset ratio, or specify a value.
Note • If a magnification is specified in [Reduce/
Enlarge], [Rotate 90 degrees] does not
function.
Variable %
Specify a ratio in the range from 50 to 400% in 1% increments. To specify a value, use
the numeric keypad or [+] and [-].
Preset %
z
100%
Scans at the same size as the original.
z
Auto %
If the scan width of the document exceeds the maximum image size, the scanned
image is rotated or reduced to fit the maximum size.
When the speed dialing is used, the maximum image size will be the size registered
in the Address Number. When speed dialing is not used, the maximum size will be
A3.
Note • You can specify whether to rotate documents in the System Administration mode. For more
information, refer to "5 Tools" > "Fax Service Settings" > "Fax Control" > "Rotate 90
degrees" in the Administrator Guide.
z
Preset ratios
Select from preset scan ratios.
You can change the default values of scan ratios other than [100%] and [Auto %]. For more information,
refer to "5 Tools" > "Fax Service Settings" > "Reduce/Enlarge Presets" in the Administrator Guide.
To Next Page
Loading...
