Fax
4
4 Fax
192
Specifying a Destination Using the Numeric Keypad
Specify a destination using the numeric keypad.
1 Enter a fax number using the numeric
keypad.
Note • If you have entered an incorrect value,
press the <C (Clear)> button and enter
the correct value.
2 Press the <Start> button.
Speed Dialing (Specifying a Destination Using an Address Number)
You can use address numbers to specify recipients. Register the address numbers for
speed dialing in advance.
When you specify address numbers, confirm that the corresponding fax numbers are correctly registered
on the machine. For information on how to register address numbers, refer to "5 Tools" > "Setup" >
"Add Address Book Entry" in the Administrator Guide.
Note • If you have entered an incorrect value, press the <C (Clear)> button and enter the correct
value.
• You can specify only fax recipients using address numbers for the Simple Fax service. The
numbers registered for the Internet Fax service and IP Fax (SIP) cannot be specified.
Numeric keypad
<Start> button
To Next Page
Loading...
