Fuji Xerox ApeosPort-IV C7780 - Registering;Deleting;Renaming Stored Programs

Registering/Deleting/Renaming Stored Programs
349
Stored Programming
8
Registering/Deleting/Renaming Stored Programs
You can register and delete stored programs on the [Stored Programming] screen.
1 Press the <Services Home> button.
2 Select [Setup].
3 Select [Stored Programming].
4 Select a feature.
Store
Register a stored program.
Refer to "Registering Stored Programs" (P.350).
Store Build Job
Register a stored program for Build Job.
Refer to "Registering Stored Programs for Build Job" (P.352).
Delete
Deletes a stored program. Select the stored program number to be deleted.
Refer to "Deleting Stored Programs" (P.352).
Enter/Change Name
Enter or change the name of a stored program.
Refer to "Entering/Changing a Stored Program Name" (P.353).
<Services Home> button