Ground Fault Interrupter
53
Product Overview
2
Ground Fault Interrupter
The machine is provided with a ground fault interrupter.
In the event of a current leakage, the ground fault interrupter will automatically cut off
the power circuit to prevent any leakage or fire from occurring.
The ground fault interrupter is normally pressed to the upper side, as shown in the
figure on the right.
If the ground fault interrupter is pressed to the lower side, unusual conditions may
occur. Please contact our Customer Support Center.
For information on how to check if the ground fault interrupter is working, refer to
"Safety Notes" (P.19)
Test button
Ground fault interrupter
Test button
Ground fault interrupter
Ground fault interrupter
Test button
The main unit
HCF B1-S
Finisher D2-P with Booklet Maker
To Next Page
Loading...
