Output Format
141
Copy
3
Binding Shift
Displays the [Booklet Creation - Binding Shift] screen.
z
Refer to "[Booklet Creation - Binding Shift] Screen" (P.141).
Divide Output
Displays the [Booklet Creation - Divide Output] screen.
z
Refer to "[Booklet Creation - Divide Output] Screen" (P.141).
Fold & Staple
Displays the [Booklet Creation - Fold & Staple] screen.
z
Refer to "[Booklet Creation - Fold & Staple] Screen" (P.142).
z
This feature does not appear for some models. An optional component is required. For more information,
contact our Customer Support Center.
Paper Supply
Displays the [Booklet Creation - Paper Supply] screen.
Select the tray to be used for body pages from [Main Body Tray], and the tray for cover
pages from [Cover Tray]. Select the same size of paper for [Main Body Tray] and [Cover
Tray], and also select the trays with paper loaded in landscape orientation ( ).
z
When [Bypass] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5] Screen" (P.102).
[Booklet Creation - Binding Shift] Screen
This screen allows you to specify the binding shift value in the range from 0 to 50 mm in 1
mm increments.
1 Use [+] and [-] or the numeric keypad to specify a binding shift value.
[Booklet Creation - Divide Output] Screen
When you have a large number of originals, the originals are divided to create subsets to
reduce the thickness of each booklet. The machine folds copies in half, and piles them up to
form a booklet.
You can specify the number of sheets in the range from 1 to 50 in 1 sheet increments.
z
When you specify the stapling feature, specify the dividing number of sheets in the range from 1 to 15.
To Next Page
Loading...
