4 Fax
144
Fax
4
Next
Select this button after entering [F Code] and [Password].
Private Polling (F Code Method)
1 Select [F Code] on the
[Transmission Options] screen.
2 Select [On].
3 Enter the F Code with the numeric
keypad and select [Next].
Note • You can enter up to 20 digits for the F Code.
4 If necessary, enter the password using the numeric keypad and select [Next].
Note • You can enter up to 20 digits for the password.
5 Select [Save].
6 Select [Polling] on the [Advanced
Features] screen.
7 Select [On].
Off
Private Polling is not used.
On
Private Polling is used.
iFax Profile (Specifying iFax Profiles)
A profile is specified to restrict attribute information such as image resolution and paper
size for transmissions between iFax-compatible machines.
Note • This feature is not available for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
• The profiles that can be processed differ depending on the iFax-compatible machine of the
recipient. Before specifying a profile, confirm the profiles the iFax-compatible machine of the
recipient can process.
• If inconsistency occurs between a profile, and stored document size and resolution, priority
is given to the settings specified in the profile.
• If the profile differs for each recipient when using Broadcast Send, the smallest size
becomes the maximum image size.
• You can set an iFax profile for each address number. For information on how to register
address numbers, refer to "Address Book" (P.343).
• The default values of [iFax Profile] can be changed in the System Administration mode. For
information on how to change the default values, refer to "iFax Profile" (P.319).
1 Select [Fax/Internet Fax] tab to
display the [Fax/Internet Fax]
screen.
2 Select [iFax/Fax] to display [iFax] in
the recipient section.
To Next Page
Loading...
