Network Settings
305
System Settings
11
SMB Server Settings
SMB Server Setup
Select the server specification method from [By Domain name], [By Domain Name & IP
Address], and [By Domain Name & Server Name].
According to the option you selected here, set [Server Domain Name], [Server IP Address],
and [Server Name] for each of SMB servers 1 to 5.
Server Domain Name
Enter the domain name of the server. Up to 15 characters are allowed.
Note • You can set this item when [SMB Server Setup] is [By Domain Name].
Important • Use the NetBIOS domain name for the domain name.
Server IP Address
Enter the server IP address using values from 0 to 255.
Note • You can set this item when [SMB Server Setup] is set to [By Domain Name & IP Address].
• 224.XXX.XXX.XXX through 255.XXX.XXX.XXX, and 127.XXX.XXX.XXX cannot be set.
Server Name
Enter the name of the server. Up to 64 characters are allowed.
Note • You can set this item when [SMB Server Setup] is is set to [By Domain Name & Server
Name].
Important • Use the NetBIOS computer name or full computer name with DNS suffix for the server
name.
PKI (Public Key) Settings
Set the SSL/TLS, S/MIME, and PDF/DocuWorks signature.
Note • Before setting the HTTP-SSL/TLS communications, the device certificate must be set. For
information on the device certificate, refer to the Network Administrator Guide.
SSL/TLS Settings
Set the SSL/TLS.
Device Certificate - Server
You can select a certificate to be linked.
HTTP - SSL/TLS Communication
Enables or disables the HTTP SSL/TLS communications.
HTTP - SSL/TLS Port Number
Specifies the port number used for HTTP SSL/TLS communication within the range from 1 to
65535.
Important • Do not use the port numbers of the other ports.
LDAP - SSL/TLS Communication
Enables or disables the LDAP SSL/TLS communications.
Device Certificate - Client
Select a certificate to be linked.
Remote Server Certificate Validation
Select whether to enable or disable a certificate of a remote server.
S/MIME Settings
Configure the settings of S/MIME.
Device Certificate - S/MIME
Select a certificate to be linked.
To Next Page
Loading...
