Operations during Scanning
173
Scan
5
2 Select the job to cancel, and then
select [Stop].
Changing the Scan Settings
You can change the scan settings while scanning the document.
1 Select [Next Original].
2 Select [Change Settings...].
3 Set [Scan Resolution], [Original Size], [2 Sided Originals], [Lighten/Darken], and
[Original Type].
For each setting, refer to "Scan Resolution (Specifying a Scanning Resolution)" (P.194), "Original Size
(Specifying an Original Size)" (P.196), "2 Sided Originals (Scanning Both Sides of a Document)"
(P.194), "Lighten/Darken (Adjusting the Scan Density)" (P.185), and "Original Type (Selecting the
Document Type)" (P.187).
4 Press the <Start> button.
To Next Page
Loading...
Need help?
General
