Job Assembly
95
Copy
3
On
In the screen displayed during scanning documents with the document feeder with
specifying Collated, [Next Original] is selected.
[Copy Job] screen
The [Copy Job] screen is displayed when copying begins.
Last Original
Select this to end scanning of documents.
Next Original
Select this when you have another document. This is on when using the [Combine
Original Sets] feature.
Cancel
The document data stored by [Combine Original Sets] is cleared and the copying is
cancelled.
Note • The same operation is performed if you press the <C> button or <Clear All> button on the
control panel.
Start
Load the next document, and select [Start] to start scanning.
Note • The same operation is performed if you press the <Start> button on the control panel.
Form Overlay (Making Copies to Overlay Documents)
This feature scans the first page of a document as a form image, and overprints it on
the copies of the subsequent pages.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
1 Select [Form Overlay].
2 Select [On].
Off
A form image in the memory is not overlaid.
On
A form image in the memory is overlaid.
To Next Page
Loading...
