EasyManua.ls Logo

Fuji Xerox DocuCentre-II 2055

Fuji Xerox DocuCentre-II 2055
615 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Setup Menu
347
System Settings
11
3 With the numeric keypad, enter the
address number (001 to 099) or
group dial number (#01 to #09) for
the broadcast destination, and
select [Add].
Note If there is more than one
broadcast destination,
continue by entering another
address number or group dial number, and pressing [Add].
4 To print a document also to the relay station, under [Print at Relay Station] select [On].
Billing - Day Time, Billing - Night Time, Billing - Midnight
Set the connection time for one unit charge in each of the time bands (daytime/night/
midnight).
You can set the value from 0.1 to 255.9 seconds in 0.1 second increments.
This item appears when the fax feature for the Login Setup/Auditron Administration is enabled. For
information on how to enable the feature, refer to Auditron Mode (P.361).
The registered details can be confirmed by printing the [Billing Data List]. For information about how to
print, refer to Billing Data List (P.392).
1 Enter the System Administration
mode.
For details on how to enter the System
Administration mode, refer to System
Settings Procedure (P.258).
2 Select one of [Billing - Day Time],
[Billing - Night Time], and [Billing -
Midnight], and select [Change
Settings].
3 Select [No Billing] or [Billing].
4 When [Billing] is selected, using the keyboard displayed on the screen or the numeric
keypad on the control panel, enter the time for one unit charge (0.1 to 255.9 seconds
in 0.1 second increments).
5 Select [Save].
6 Exit the System Administration mode.
iFax Profile
Set the format of the iFax profile.
A profile is specified to restrict attribute information such as the image resolution and paper
size for transmissions between iFax-compatible machines.
TIFF-S
This profile is the iFax standard. For documents that are larger than A4, the size is reduced
automatically to A4 for transmission.
TIFF-F
Select this profile when you specify super-fine for the resolution or when you send A3 or B4
documents.
TIFF-J
Select this profile for sending documents in JBIG.

Table of Contents

Other manuals for Fuji Xerox DocuCentre-II 2055

Related product manuals