Fuji Xerox DocuCentre-V 5070 User Manual

5 Tools
168
Tools
5
Select the ratio from [100%], [Auto %], and the buttons registered as Reduce/Enlarge
Preset buttons.
When the default value of [Paper Supply] is set to [Auto Select], [Auto %] cannot be selected
for [Reduce/Enlarge].
For information on the Reduce/Enlarge Preset buttons, refer to "Reduce/Enlarge Presets" (P.173).
Original Type
Set the default value for [Original Type] on the [Image Quality] screen.
Lighten/Darken
Set the default value for [Lighten/Darken] of [Image Options] in the [Image Quality] screen.
Sharpness
Set the default value for [Sharpness] of [Image Options] in the [Image Quality] screen.
Background Suppression
This feature allows you to suppress the background color of documents.
Set the default value for [Suppress Background] of [Background Suppression] in the [Image
Quality] screen.
[Background Suppression] is valid when [Original Type] is set to [Photo & Text], [Text],
[LightText], or [Text on See-Through Paper].
2 Sided Copying
Set the default value for [2 Sided Copying] in the [Copy], [Layout Adjustment], and [Output
Format] screens.
Mixed Size Originals
Set the default value for [Mixed Size Originals] in the [Layout Adjustment] screen.
Edge Erase - Top Edge
When you copy a document with the document cover open or when you copy a book, the
edges and center margin of the document may be printed as black shadows. This feature
allows you to erase such shadows on the top edge.
Set the default value for the amount of edge erased from the original in the top directions
in [Edge Erase] in the [Layout Adjustment] screen. Set the value from 0 to 50 mm in 1 mm
increments.
Note • You cannot copy the whole area even if you set [0] to [Edge Erase - Top Edge]. For the printable area,
refer to "Printable Area" (P.595).
Edge Erase - Bottom Edge
When you copy a document with the document cover open or when you copy a book, the
edges and center margin of the document may be printed as black shadows. This feature
allows you to erase such shadows on the bottom edge.
Set the default value for the amount of edge erased from the original in the bottom
directions in [Edge Erase] in the [Layout Adjustment] screen. Set the value from 0 to 50 mm
in 1 mm increments.
Note • You cannot copy the whole area even if you set [0] to [Edge Erase - Bottom Edge]. For the printable
area, refer to "Printable Area" (P.595).

Fuji Xerox DocuCentre-V 5070 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre-V 5070
Category	All in One Printer
Language	English