Replacing Consumables
77
Maintenance
3
3
Empty the container.
4
Insert the emptied hole punch waste container
into its original position until it stops.
5
Close the finisher front door.
Note • If the front door is not closed completely, a message appears and the machine will remain paused.
Replacing Stamp
If the machine offers the Fax service and the Stamp Kit SP (optional) is installed, replace the
stamp cartridge when stamp impressions start to fade.
Important • Do not touch the ink pad of the stamp cartridge. If it comes into contact with your skin, wash
immediately.
• Problems caused by using consumables not recommended by Fuji Xerox are not covered by the
maintenance service contract.
• Before using consumables, carefully read instructions and precautions on their packages.
Note • We recommend always keeping spare consumables/periodic replacement parts in stock.
• To order consumables, contact our Customer Support Center.
(Product Name: Stamp Replacement Kit, Product Code: F451)
1
Lift the document feeder gently, and open the
Side 2 scanner.
To Next Page
Loading...
Need help?
General
