Replacing Consumables
63
Maintenance
3
îš„ Handling consumables/periodic replacement parts
z
Do not store boxes of consumables/periodic replacement parts upright.
z
Do not unpack consumables/periodic replacement parts before use. Avoid storing
consumables/periodic replacement parts in the following locations:
- In high temperature and humid locations
- Near heat-generating devices
- Areas exposed to direct sunlight
-Dusty areas
z
When using consumables/periodic replacement parts, carefully read precautions for use.
Precautions for use are instructed on their bodies or packages, or a precaution sheet is
included in their packages.
z
We recommend always keeping spare consumables/periodic replacement parts in stock.
z
When calling our Customer Support Center to order consumables/periodical replacement
parts, have the product codes ready.
z
The use of consumables/periodic replacement parts not recommended by Fuji Xerox
could impair machine quality and performance. Use only consumables/periodic
replacement parts recommended by Fuji Xerox.
îš„ Checking the status of consumables
You can check the status of consumables on the [Supplies] screen.
For information on consumables, refer to "Supplies" (P.105).
The following shows the reference section for each procedure.
Replacing Toner Cartridges ......................................................................................................................................................... 63
Replacing Drum Cartridges (for Customers Having a Spot Maintenance Contract)..................................................... 66
Replacing Staple Cartridge (for Finisher-B1)........................................................................................................................... 68
Replacing Staple Cartridge (for C3 Finisher or C3 Finisher with Booklet Maker) ........................................................... 70
Replacing Booklet Staple Cartridge (for Booklet Maker Unit for Finisher-B1)................................................................ 72
Replacing Booklet Staple Cartridge (for C3 Finisher with Booklet Maker)....................................................................... 72
Emptying the Hole Punch Waste Container (for Finisher-B1)............................................................................................. 75
Emptying the Hole Punch Waste Container (for C3 Finisher or C3 Finisher with Booklet Maker) ............................. 76
Replacing Stamp ............................................................................................................................................................................ 77
Replacing Toner Cartridges
The following messages are displayed on the touch screen depending on the amount of
toner remaining. Replace the toner cartridge according to the message.
Message
Remaining Page Yield
*1
Solution
Please order a Toner
Cartridge.
Approx. 4,000 pages You do not need to replace the
Toner Cartridge immediately.
Order the Toner Cartridge
displayed on the screen.
The Toner Cartridge needs
to be replaced. -
The machine will stop. Replace
the toner cartridge with a new
one.